EUCNC 2017, European Conference on Networks and Communications, June 12-15, 2017, Oulu, Finland
We study the transmit time reversal beamforming in a 8x1 MISO communication system at 2.68GHz. We consider the downlink time reversal transmission where a BS communicates with one user. A prototype composed by 8 antennas and designed by Orange labs acts as the BS while the user has a single antenna. The reciprocity property is destroyed by the non-symmetric characteristics of the RF electronic circuitry. We use relative calibration which is based exclusively on signal processing techniques to solve this issue. Utilizing a controlled test setup based on OpenAirInterface, the ExpressMIMO2 SDR boards, as well as a servo controlled rail, we show the feasibility of a relative calibration method through beamforming SNR measurements. We also evaluate the performance of an antenna selection scheme at the transmit side as a low-cost low-complexity alternative to capture many of the advantages of multi-antenna systems. The measurements show that the relative calibration method is performing almost optimal and that the complexity can be significantly reduced by using antenna selection.
Type:
Conference
City:
Oulu
Date:
2017-06-12
Department:
Communication systems
Eurecom Ref:
5260
Copyright:
© 2017 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
See also:
